Eleaf iStick Pico 21700 with ELLO tank

Brushed Silver

The Pico 21700 mod delivers up to 100W of power to tanks as wide as 25mm, and is compatible with 21700 and 20700 cells, as well 18650 cells when using the included adapter. Supports atomizers in the resistance range of 0.1 - 3.5ohm in wattage and bypass modes, and 0.05 - 1.5ohm in temp control. The micro USB port supports 2A charging; however, an external charger is recommended.

The ELLO tank is 25mm wide and features and all-new Eleaf HW coil series - included in the kit are 1 x HW2 Dual-Cylinder 0.3ohm coil (pre-installed), and 1 x HW1-C Single-Cylinder 0.25ohm ceramic coil. The ELLO has a secure slide to fill lid, and 2ml capacity that can be expanded to 4ml using the included extended glass and chimney.

Size: 51 x 26 x 119mm (after extended)
E-liquid capacity: 2ml (extendable to 4ml)
Output wattage: 1-100W
Output voltage: 0.5-9V
Output mode: VW/Bypass/TC(Ni/Ti/SS/TCR)
Resistance range: 0.05-1.5ohm (TC modes)/0.1-3.5ohm (VW/Bypass mode)
Battery type: 21700, 20700, 18650 (cells not included - 18650 adapter included)
Maximum charging current: 2A
0.91-inch Large Display
Fits tanks up to 25mm
Firmware upgrading
Retractable Top Fill
Easy to Clean, and Extendable to 4ml
1x iStick Pico 21700
1x ELLO Atomizer
1x HW2 Dual-Cylinder 0.3ohm Head (pre-installed)
1x QC USB Cable
1x HW1-C Single-Cylinder 0.25ohm Head
2x User Manuals
Spare Parts

Replacement coils can be found here.

Battery can be found here. 18650, 20700, 21700.

Please read the user manual carefully before using this device.



Subscribe to our newsletter