OBS Cube Mini Kit

OBS releases a new and petite product in the name of Cube Mini; This device has a wattage output of 5W to 25W which is completely dependent on the battery level. Included with the starter kit is the Cube Mini Sub-Ohm Tank. This unique Sub-Ohm Tank can be utilized for mouth to lung or direct lung usage with a simple twist of the airflow control ring.

Starting off with the mod, the OBS Cube Mini retains the elegant feel and look of its older counterpart. Simplicity comes to mind internally and externally due to the removal of variable wattage, voltage, and a screen. On the face of the device is a single oversized button that acts as the firing mechanism, along with the on and off switch.  Located under is an LED light that indicates if the vape mod is on, there are no atomizers, current battery life, and firing activation. This light will turn white if the battery is above 3.5V and red when the battery is below 3.5V. Powering the Cube Mini is an integrated 1500mAh battery, which is perfect for on the go travels when running high ohm coils. This device has a potential output of 5 to 25W or a voltage range of 3.3 to 4.2V; however, with a constant voltage output system, the maximum output of this device is defined by the current charge of the battery. Charging this device can be easily done through the USB port, once again located on the face of the device.

 Included with the Starter Kit is the Cube Mini Sub-Ohm Tank, a vape tank that perfectly matches the size of the OBS Cube Mini. This vape tank measures at 21mm wide and 42mm tall. Depending on the resin finish chosen, the 3mm bore resin drip tip finish will match the color of the device. On the base of the Cube Mini Sub-Ohm Tank is a surprisingly smooth adjustable airflow control ring. Turning it counter-clockwise all the way through will allow users to utilize the direct lung airflow, measuring at 8mm by 1mm. A full clockwise action will have users encounter four 1mm by 1mm airflow slots; these airflow slots are meant for mouth-to-lung hits and can be fully adjusted for comfort and preference. Internally, the OBS Cube Mini Sub-Ohm Tank utilizes two types of coil, the S1 coil head and N1 coil head; The S1 coil head has a mesh coil construction and is rated at 0.6 ohm, the N1 coil head has a regular kanthal coil construction and is rated at 1.2 ohm. Each coil has its recommended liquid, the S1 for freebase e-liquid, whilst the N1 is for nicotine salt. Juice enters the vape tank through a push to open tab located on the top of the tank with the indicator of a droplet. A simple nudge past the opening will allow this segment to come off, allowing for a more thorough cleaning.


Specifications:

  • 5 to 25W Wattage Output
  • 0.4 - 3.0 ohm Atomizer Resistance Range
  • 3.3 - 4.2V Output Range
  • Constant Voltage Output
  • Output Based on Battery Charge State
  • Built in 1500mAh Battery
  • 1.5A Charge Current
  • 2 to 3 Hour Charge Time
  • Battery LED Light Indicator
  • Enlarged Firing Button
  • Screen-less Design
  • Spring Loaded Gold Plated 510 Connection
  • Stainless Steel Thread Point
  • Zinc Alloy Construction

 


Product Dimensions:

  • 71mm by 26mm by 26mm

 

ATOMIZER SPECIFICATIONS:

  • 21 mm Base Diameters
  • 2 ml Max Capacity with Standard Glass
  • 3.5 ml Max Capacity with Bubble Glass
  • Push to Open
  • OBS Mini Replacement Coil Family
  • S1 Mesh Coil 0.6 ohm Mesh Coil
  • N1 Coil 1.2 ohm Kanthal Round Wire
  • Precision Adjustable Bottom Airflow
  • Stainless Steel Construction
  • Pyrex Glass
  • Stainless Steel 510 Threading
  • 24K Gold Plated Contact
  • 3mm Bore Resin Drip Tip

 

 INCLUDES:

  • One OBS Cube Mini Box Mod
  • One OBS Cube Mini Sub-Ohm Tank
  • One OBS S1 Coil Pre-Installed
  • One N1 Coil
  • One Spare Glass Tank Section
  • Spare Parts Pack
  • One USB Cable
  • One User Manual
  • One Warranty Card

OBS Cube Mini coils can be found here.

Please read the user manual carefully before using this device

Subscribe to our newsletter