COOLNIC Salts are now available online and in-stores!
    0

    COOLNIC Salts are now available online and in-stores!

      0

      Your Cart is Empty

        Home / Products / UD Kanthal A1 Wire
        UD Kanthal A1 Wire
        UD Kanthal A1 Wire
        UD Kanthal A1 Wire
        UD Kanthal A1 Wire
        UD Kanthal A1 Wire
        UD Kanthal A1 Wire
        UD Kanthal A1 Wire
        UD Kanthal A1 Wire
        UD Kanthal A1 Wire
        UD Kanthal A1 Wire
        UD Kanthal A1 Wire
        UD Kanthal A1 Wire
        UD Kanthal A1 Wire
        UD Kanthal A1 Wire
        UD Kanthal A1 Wire
        UD Kanthal A1 Wire
        UD Kanthal A1 Wire
        UD Kanthal A1 Wire
        Sale

        UD Kanthal A1 Wire

        $6.90 $12.90 You Save 46% ($6.00)

        Resistance Wire Kanthal A1.  Used to make your coil(s).  Approximately 30 feet.

        Clapton and 22ga are 15 feet spool

        Available in 9 gauges for varying resistance levels and build types:

        AWG 22: Low Resistance (0.11 ohms/inch)
        AWG 24: Low Resistance (0.175 ohms/inch)
        AWG 26: Low Resistance (0.28 ohms/inch)
        AWG 28: Low – Standard Resistance (0.44 ohms/inch)
        AWG 30: Low – Standard Resistance (0.70 ohms/ inch)
        AWG 32: Low – Standard Resistance (1.1 ohms/ inch)
        AWG 33: Low – Standard – High Resistance (1.39 ohms/inch)
        AWG 34: Standard – High Resistance (1.76 ohms/inch)

         

        Gauge (AWG) Average Wire
        Diameter (in.)        		 Feet per Pound Resistance
        ohms/ft. @ 68°F
        16 0.0508 159 0.324
        20 0.032 401 0.817
        22 0.0253 641 1.31
        24 0.0201 1018 2.07
        26 0.0159 1626 3.31
        27 0.0142 2040 4.15
        28 0.0126 2609 5.27
        29 0.0113 3226 6.55
        30 0.01 4142 8.36
        32 0.008 6473 13.1
        33 0.0071 8217 16.6
        34 0.0063 10437 21.1
        Why use Kanthal A1?

        Kanthal A1 is commonly used for electric heating elements in large industrial furnaces and is often found in glass, ceramics, electronics, and steel industries. Its high resistivity and ability to withstand elements without oxidation makes it a popular choice when dealing with large-scale heating elements.

        Specifications

        • 22% chromium (Cr), 5.8% aluminum (Al), Iron (Fe) balance
        • Density: 7.1 g/cubic cm
        • Tensile strength: 680 n/mm_
        • Melting Temperature: 1500¡C (2732¡F)
        • Maximum Operating Temperature: 1400¡C (2550¡F)
        • Density: 0.256 lbs/cubic in.
        • Specific heat capacity @ 68¡F: 0.11 Btu/lb¡F

        Kanthal A1 vs. Kanthal D

        Kanthal A1 has a higher maximum operating temperature of 1400¡C compared to 1300¡C for Kanthal D. It also has a slightly higher tensile strength.

         

        Important Note:
        Rebuildable atomizer coils and wicks have known risks.

        Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

        This is because:

        1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
        2. If it is not tested it is entirely the risk of the user.
        3. Faulty wicks/coils WILL blow electronic devices.
        4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
        5. No new coil/wick assembly should be used on an electronic device until known to be safe.
        6. These items destroy electronic devices if faulty. This is a known issue. 

         

        Size

        Collections: Rebuildables

        Category: Rebuildables, sales

        Related Items